MDF Supply to Egyptian Manufacturers
CFR Alexandria · Damietta · Port Said · Sokhna · 30–50 days production + 20–28 days transit · One 40' HC container per thickness.
Egyptian furniture, kitchen and door manufacturers form one of the largest MDF consumer bases in the Middle East. TIC Dubai supplies MDF direct from qualified mills in Thailand and wider Southeast Asia, shipping full container loads on CFR terms to Egyptian ports.
Our role is mill representation and international procurement: securing consistent thickness tolerances, moisture behaviour and glue quality against your production requirements, not warehousing panels in-country.
MDF (Medium Density Fibreboard) in the Egyptian market
Egypt is one of the largest MDF consumer markets in the MENA region. Damietta's concentrated furniture-manufacturing cluster alone imports MDF at industrial scale, and Cairo, 10th of Ramadan, 6th of October, Alexandria and Obour add further demand from kitchen, door and interior producers. The Egyptian market has matured well beyond commodity-grade panels: buyers now specify density, moisture behaviour and emission class deliberately.
Thailand is the reference origin for Egyptian furniture manufacturers thanks to consistent thickness tolerances and clean-machining behaviour. Other qualified Asian mills are considered when they offer better economics, thicker board availability or shorter lead-times.
TIC Dubai coordinates full and mixed-thickness containers of standard, moisture-resistant (MR) and low-emission (CARB P2 / E1) MDF factory-direct to Alexandria, Damietta, Port Said and Sokhna.
Who imports mdf (medium density fibreboard) from TIC into Egypt
Serial-production furniture factories consuming standard MDF for carcass, back panels and drawer bottoms in long, repeat runs.
Kitchen carcass and shutter producers requiring MR (green core) MDF for wet-area cabinets and consistent thickness tolerances for hinge and edge work.
Flush-door and moulded-door producers importing 3 mm to 6 mm door skins and 30–35 mm door cores in coordinated shipments.
Retail, hospitality and office fit-out contractors specifying low-emission MDF for enclosed spaces and hotel projects.
Melamine-lamination lines pressing decorative surfaces onto imported raw MDF for onward sale to workshops.
Regional distributors running mixed-thickness containers to supply smaller joinery workshops without in-house import capability.
Typical specifications shipped to Egypt
Thickness tolerance is the single most-quoted quality metric in the Egyptian market. Tolerances of ±0.15 mm on 18 mm and tighter for door-skin thicknesses are expected from qualified mills.
Density typically sits at 720–740 kg/m³ for general furniture use; higher densities (up to 800 kg/m³) are available for premium machined-edge and door-frame applications.
Emission class matters more each year. CARB P2 and E1 boards are recommended for kitchens, children's furniture and enclosed hotel interiors, and mandatory for buyers exporting furniture onward.
Where Egyptian buyers use mdf (medium density fibreboard)
- Furniture carcass and panel production
- Kitchen carcass, doors and shutters
- Flush doors, moulded doors and door skins
- Wall panelling and interior fit-out
- Machined and laminated component supply
How mdf (medium density fibreboard) is specified on Egyptian projects
16 and 18 mm standard-density MDF is the workhorse for cabinet sides, tops, bases and shelves in Egyptian furniture factories.
MR (green core) MDF at 18 mm is preferred for shutters and carcasses exposed to periodic moisture, a growing segment as Egyptian kitchen buyers move upmarket.
3 mm and 4 mm door skins pressed onto tubular or honeycomb cores, with 30–35 mm high-density MDF used for the door edge frame.
12 to 18 mm MDF machined into wall panels, wainscoting and skirtings for hotel and residential fit-out.
Raw MDF supplied to Egyptian melamine-press lines for finished decorative panel production sold on to joineries and furniture retailers.
CFR discharge options for mdf (medium density fibreboard)
Main discharge port for Cairo and Delta furniture buyers. Highest throughput and best onward logistics for mixed loads.
Preferred by the Damietta furniture cluster, shortest inland move to the manufacturing base.
Used where an East-Port bond arrangement suits the buyer's clearing agent, particularly for large forward-booked shipments.
Chosen by 10th of Ramadan and East Cairo manufacturers for direct Red Sea routing.
Factory-Direct Supply Model.
TIC Dubai operates as a mill representation and international procurement partner. Every order is coordinated directly with a verified overseas manufacturer and shipped in container quantities against your project specification.
We do not maintain local warehouse stock. Products are supplied directly from carefully selected international manufacturing partners.
- Direct mill sourcing
- Container-load shipments
- Forward production bookings
- Project-based supply
- International procurement
- Mill-direct pricing
- Consistent, certified quality
- Long-term supply partnerships
Who we work with.
TIC Dubai partners with organisations that specify, import or build at project scale, across the UAE, GCC, Levant, Africa and wider Middle East.
How our supply model works best.
A quick view of where TIC Dubai adds the most value, and where a local stockist may serve you faster.
Container, project & repeat procurement.
- Container orders
- Factory bookings
- Project supply
- Repeat procurement
- Long-term contracts
- Bulk purchasing
Retail, spot & same-day pick-ups.
- Retail-quantity purchases
- Same-day requirements
- Spot warehouse pick-ups
If your requirement sits on the right, a local stockist is likely to serve you faster. We're happy to point you in the right direction.
How shipments are booked, loaded and sent to Egypt
A 40' HC container typically carries around 26–29 tonnes of MDF, translating to roughly 40–48 m³ depending on thickness and packing. Mixed thickness loads are the default request from Egyptian buyers who need production balance rather than a single-SKU shipment.
Panels are strapped in bundles on skids with edge protection and shrink wrap, floor-loaded to maximise volume. Larger 1830 × 2440 mm sheets ship on wider skids and require specific container loading discipline.
For serial production plants, TIC coordinates rolling monthly containers matched to production run-rate rather than one oversized shipment that ties up factory floor space.
What accompanies every mdf (medium density fibreboard) shipment
Every mill is pre-qualified on thickness tolerance, density variation, glue-line integrity and formaldehyde emission class. Orders ship against the confirmed specification with mill quality reports.
Third-party pre-shipment inspection is straightforward at qualified Thai and Asian mills for buyers running strict acceptance protocols on incoming raw material.
For CARB P2 and E1 orders, the emission certification is issued at the mill and travels with the shipment documentation for use in downstream export or specification compliance.
Forward bookings, OEM and mill representation
Forward mill bookings: furniture manufacturers and door producers with steady monthly consumption regularly reserve production capacity across a 3-month or quarterly horizon to lock price and stagger shipments.
OEM / private label: mill-branded packing lists, invoices and edge-band branding can be arranged where the buyer runs a proprietary distribution model.
Mill representation: TIC acts as the primary point of contact for the represented Thai and Asian mills, commercial, technical, logistics and after-sales, for Egyptian buyers who prefer a single accountable relationship.
Frequently asked about mdf (medium density fibreboard) for Egypt
Is Thai MDF preferred by Egyptian furniture manufacturers?
Thai mills are widely respected for consistent density and clean-machining behaviour. Other qualified Asian mills are quoted alongside when they offer better economics or lead-time.
Can you supply moisture-resistant (MR) MDF?
Yes. MR (green-core) MDF is regularly shipped for kitchen and bathroom applications. Standard and MR loads can be combined in a single container.
What density should I specify?
Most Egyptian buyers specify 720–740 kg/m³ for general furniture and door work. Higher densities are available for premium machined-edge applications.
Do you supply CARB P2 or E1 low-emission MDF?
Yes. Low-emission grades are available from certified mills and are advisable for export furniture or contract projects with formaldehyde limits.
What packing method is used for CFR Egypt shipments?
Panels are strapped into bundles on pallets or skids with edge protection and shrink wrapping. Container floor and top voids are dunnage-secured to prevent transit damage.
Can I combine thicknesses in one container?
Yes. Mixed thickness loads are standard, subject to minimum per-thickness quantities that the mill can produce economically in one production run.
Do you offer laminated MDF (melamine faced)?
Melamine-faced MDF and pre-lam boards can be quoted, though most Egyptian manufacturers import raw MDF and laminate locally for control over design range.
Related technical reading
Request an Egypt CFR quotation for mdf (medium density fibreboard)
Share product, thickness or section, quantity in containers and your preferred Egyptian port. We reply with mill-direct CFR pricing, lead time and shipping options.