Film Faced Plywood Supply to Egypt
CFR Alexandria · Damietta · Port Said · Sokhna · 30–45 days production + 20–28 days transit · One 40' container per specification.
TIC Dubai supplies film faced plywood direct from qualified mills in China and Southeast Asia to Egyptian importers, contractors and distributors. Orders ship in full container loads on CFR terms to Alexandria, Damietta, Port Said or Sokhna.
Egyptian construction sites and formwork specialists source film faced plywood for column, wall and slab shuttering. TIC's role is to represent the mill, secure production capacity and coordinate the shipment, not to hold local stock.
Film Faced Plywood in the Egyptian market
Egypt is one of the largest film faced plywood consumers in the Middle East and North Africa. Continuous investment in residential towers, commercial developments, industrial cities and Suez-corridor infrastructure drives sustained demand for high-quality concrete formwork panels. Cairo, New Cairo, New Administrative Capital, Alexandria, 6th of October, 10th of Ramadan and the Sokhna industrial belt all consume film faced plywood at contractor and formwork-specialist level.
Historically the market was served by mixed-quality panels sold from local stockists. Contractors running multi-tower and infrastructure programmes are increasingly moving upstream: booking film faced plywood mill-direct in full containers to control specification, cost per pour and reuse economics. That is precisely the model TIC Dubai operates.
TIC represents qualified Chinese and Southeast Asian mills producing brown phenolic, green PVC, yellow PVC and finger-joint core panels. Every shipment lands at the buyer's chosen Egyptian port on CFR terms with mill documentation intact.
Who imports film faced plywood from TIC into Egypt
General contractors executing residential towers in New Cairo, New Administrative Capital, Alexandria and Sheikh Zayed source 12 mm and 18 mm brown phenolic panels for column, wall and slab formwork.
Specialist formwork subcontractors standardising on 15 mm or 18 mm high-density panels with defined reuse cycle expectations across projects.
Bridges, tunnels, water-treatment plants, metro extensions and Suez Canal corridor works, where higher-cycle brown phenolic or PVC-faced panels are required.
Egyptian importers stocking mixed-thickness film faced plywood for site-consumption buyers and hardware traders across governorates.
Precast concrete manufacturers requiring dimensional-stable, high-cycle panels for repeat mould use.
Typical specifications shipped to Egypt
Egyptian sites use metric formwork frames, so 1220 × 2440 mm and 1250 × 2500 mm are the two dominant sizes. Cut-to-size panels are possible from the mill for large projects but usually not worth the premium over on-site cutting.
Density typically sits in the 550–650 kg/m³ range depending on mill and core structure. Full hardwood cores (Eucalyptus, Poplar or mixed hardwood) deliver higher stiffness and reuse; finger-joint cores hit a lower price point for site-consumption buyers.
WBP phenolic glue is the standard for the Egyptian climate. Face films range from 120 g/m² economy through 220 g/m² high-cycle, and are stated on every quotation.
Where Egyptian buyers use film faced plywood
- Concrete formwork for columns, walls and slabs
- Bridge, tunnel and civil-works shuttering
- High-rise residential and commercial construction
- Infrastructure projects requiring repeated reuse
- Distributor stock programmes for site delivery
How film faced plywood is specified on Egyptian projects
18 mm brown phenolic-faced panels on a full hardwood core remain the workhorse specification for Egyptian tower projects. Reuse cycles of 8–15 pours are typical when panels are handled and cleaned correctly.
12 mm and 15 mm panels are preferred on slab decks, balancing weight against stiffness. Green PVC or yellow PVC faces are specified where a smoother finished-concrete surface is targeted.
Infrastructure projects along the Suez Corridor and national road programme routinely specify 18 mm and 21 mm panels with higher reuse cycles and stricter face-film performance.
Egyptian distributors run rolling mixed-thickness containers combining 12, 15 and 18 mm to satisfy site orders across governorates without holding excessive per-SKU stock.
Precast yards use thicker PVC-faced panels as skin plates for repeat moulds, replacing worn faces without redesigning the underlying framework.
CFR discharge options for film faced plywood
Primary discharge port for Cairo, Delta and Upper Egypt clearing agents. Highest container throughput and shortest inland lead-time to Greater Cairo.
Popular with distributors serving furniture manufacturing zones and the Eastern Delta. Free-zone facilities are widely used by importers.
Fast Suez Canal transhipment from Asia. Preferred where an East-Port bond arrangement is in place with the buyer's clearing agent.
Red Sea entry point serving Suez Canal corridor projects, 10th of Ramadan and East Cairo industrial zones directly.
Factory-Direct Supply Model.
TIC Dubai operates as a mill representation and international procurement partner. Every order is coordinated directly with a verified overseas manufacturer and shipped in container quantities against your project specification.
We do not maintain local warehouse stock. Products are supplied directly from carefully selected international manufacturing partners.
- Direct mill sourcing
- Container-load shipments
- Forward production bookings
- Project-based supply
- International procurement
- Mill-direct pricing
- Consistent, certified quality
- Long-term supply partnerships
Who we work with.
TIC Dubai partners with organisations that specify, import or build at project scale, across the UAE, GCC, Levant, Africa and wider Middle East.
How our supply model works best.
A quick view of where TIC Dubai adds the most value, and where a local stockist may serve you faster.
Container, project & repeat procurement.
- Container orders
- Factory bookings
- Project supply
- Repeat procurement
- Long-term contracts
- Bulk purchasing
Retail, spot & same-day pick-ups.
- Retail-quantity purchases
- Same-day requirements
- Spot warehouse pick-ups
If your requirement sits on the right, a local stockist is likely to serve you faster. We're happy to point you in the right direction.
How shipments are booked, loaded and sent to Egypt
A single 40' HC container typically carries approximately 2,100 sheets of 12 mm, 1,700 sheets of 15 mm, 1,400 sheets of 18 mm or 1,200 sheets of 21 mm, subject to packing method, palletisation and mill practice. Mixed loads are commonly booked so distributors can hit a target sheet mix in one shipment.
Panels are strapped into bundles on skids or pallets, edge-protected and shrink-wrapped. Voids in the container are dunnage-secured to prevent movement in transit. Mill packing lists specify sheet count per bundle, bundle weight and total container piece count.
For contractors booking against project schedules, TIC coordinates phased monthly containers to match pour cycles rather than one large upfront shipment sitting on-site.
What accompanies every film faced plywood shipment
Every mill TIC represents is pre-qualified against consistent core construction, face film weight and phenolic glue integrity. Orders ship against the specification confirmed at PI stage; deviation from that specification is not commercially acceptable.
Standard documentation includes the mill test / quality report, packing list, commercial invoice, bill of lading, certificate of origin and fumigation certificate where required. Third-party pre-shipment inspection (SGS, Bureau Veritas or CIQ) can be arranged for project-critical orders.
For Egyptian buyers running acceptance protocols at site, TIC can provide reference face-film weight, boil-test evidence and mill-declared density on the PI to avoid surprises at first pour.
Forward bookings, OEM and mill representation
Forward mill bookings: contractors and distributors with visibility of 3–6 month consumption regularly reserve mill capacity to lock price and lead-time across phased shipments. This is the recommended model for project-based buyers.
OEM and private label: TIC can arrange mill-printed film with the buyer's brand or project name on request, subject to minimum runs. This is a mature service for Egyptian distributors building own-brand programmes.
Mill representation: for buyers who want a single mill-of-record for continuity, TIC operates as the mill representative in Dubai handling technical, commercial and logistics coordination.
Frequently asked about film faced plywood for Egypt
Which film faced plywood grade is most requested in Egypt?
Brown phenolic-faced plywood on a full hardwood core remains the workhorse specification. Green PVC and yellow PVC faces are increasingly requested where higher reuse cycles or better surface finish are needed.
What thicknesses do Egyptian contractors typically order?
12 mm and 18 mm dominate site orders. 15 mm and 17 mm are common for specific formwork systems and infrastructure projects.
Do you supply China OEM film faced plywood with finger-joint core to Egypt?
Yes. Finger-joint core panels give a very competitive price point for Egyptian distributors and site-consumption buyers who value cost over maximum reuse cycles.
Can you match a specific density or reuse-cycle claim?
We quote against the specification you provide. Mill datasheets, test certificates and, where required, third-party pre-shipment inspection can be arranged.
How many pieces load into a 40' container?
Approximately 2,100 sheets at 12 mm, 1,700 at 15 mm, 1,400 at 18 mm and 1,200 at 21 mm on standard 1220 × 2440 mm sheets, subject to packing method and mill.
Do you supply mixed thicknesses in a single container?
Yes. Mixed loads combining 12/15/18 mm or brown and PVC faces are routinely accepted subject to minimum per-thickness quantities.
What documentation do Egyptian buyers receive?
Commercial invoice, packing list, bill of lading, certificate of origin, fumigation certificate and mill quality report as standard.
Is forward booking possible for project pipelines?
Yes. Contractors with active project pipelines can secure mill capacity for phased monthly shipments across the project duration.
Related technical reading
Request an Egypt CFR quotation for film faced plywood
Share product, thickness or section, quantity in containers and your preferred Egyptian port. We reply with mill-direct CFR pricing, lead time and shipping options.