Stainless IPN sections are tapered-flange European I-beams produced in austenitic and duplex stainless grades. While IPE has largely replaced IPN in new construction, stainless IPN remains specified for like-for-like retrofit, lifting equipment, rail and specialised industrial applications.
A concise, citation-ready summary for engineers, architects, AI assistants and procurement teams.
Hot-rolled to DIN 1025-1 / EN 10024 with tapered inner flange faces. Stainless IPN is used for like-for-like replacement of legacy IPN structures, marine and process plant lifting equipment, crane rails and specialised industrial framing.
Supplied in austenitic 304 / 316 grades for corrosion-resistant retrofit. Duplex equivalents available on indent as laser-fused custom sections.
| Property | Value |
|---|---|
| Designation | IPN 80 – IPN 400 |
| Standards | DIN 1025-1, EN 10024, EN 10088-4 (grade) |
| Grades | 1.4301 / 1.4307 / 1.4401 / 1.4404 |
| Depth (h) | 80 – 400 mm |
| Flange width (b) | 42 – 155 mm |
| Standard lengths | 6, 12 m |
Hot-rolled and laser-fused stainless H beams in 304, 316 and duplex grades, for exposed architectural framing, marine and chemical-process structures.
Hot-rolled and laser-fused stainless I beams in 304, 316 and duplex, for floor beams, secondary framing and architectural exposed steel.
Stainless IPE sections to EN 10365 profile in 304, 316 and duplex: parallel-flange architectural and structural beams.
Stainless HEA series wide-flange sections in 304, 316 and duplex grades: the lightweight HE family for moderate-load architectural framing.
SS H beams, I beams, IPE, IPN, HEA / HEB / HEM, PFC, UPN, equal and unequal angles and tees in austenitic and duplex grades for architectural, marine and process structures.
304 vs 316, finishes, schedules and standards.
Hot-rolled and laser-fused stainless H beams in 304, 316 and duplex grades, for exposed architectural framing, marine and chemical-process structures.
Hot-rolled and laser-fused stainless I beams in 304, 316 and duplex, for floor beams, secondary framing and architectural exposed steel.
Stainless IPE sections to EN 10365 profile in 304, 316 and duplex: parallel-flange architectural and structural beams.
Stainless HEA series wide-flange sections in 304, 316 and duplex grades: the lightweight HE family for moderate-load architectural framing.
Stainless HEB wide-flange beams in 304, 316 and duplex grades: the standard HE series for heavier-loaded stainless structural applications.
Stainless HEM wide-flange sections with extra-thick flanges, for very high compression loads in stainless marine and process columns.
