Cold rolled copper coils & precision strips.
Cold rolled copper coils and slit-to-width strip for electrical components, transformer windings, switchgear, connectors and electronics, across the GCC.
From master coil to precision strip.
Copper Coils
Cold rolled copper coils for slitting, stamping and downstream fabrication.
Copper Strips
Standard width copper strip for electrical components, terminals and connectors.
Precision Copper Strips
Tight-tolerance cold rolled strip for transformer windings, switchgear and electronic assemblies.
Cold Rolled Copper Strips
H, ½H and full-hard tempers for stamping, pressing and forming.
Thickness, width, coil weight, surface.
Thickness Range
0.1 mm to 3.0 mm cold rolled, slit to width on request.
Width Range
10 mm to 600 mm, covering standard mill widths and precision-slit narrow strip.
Coil Weight
Up to 2000 kg per coil, with ID 300/400/500 mm options for converter compatibility.
Surface
Bright cold-rolled, oxide-free finish for stamping, plating or insulation coating.
O, ½H, H and EH cold rolled tempers.
- O (annealed): soft, maximum formability, deep drawing
- ½H (half hard): balanced strength and forming
- H (hard): springs, terminals, stamped parts
- EH (extra hard): connectors, leadframes, precision stamping
Where copper strip ships.
Copper coils and strips supply across the GCC, Levant & Iraq.
TIC Dubai supplies copper coils and strips to fabricators, OEMs, valve and fitting manufacturers, joineries and trade distributors across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain in the UAE; Riyadh, Dammam, Al Khobar and Jeddah in Saudi Arabia; Doha in Qatar; Muscat, Sohar and Salalah in Oman; Kuwait City, Shuwaikh and Shuaiba in Kuwait; Manama in Bahrain; Amman and Aqaba in Jordan; and Erbil, Baghdad, Basra and Umm Qasr in Iraq.
Copper coils & strips FAQ
What temper of copper strip is used for transformer windings?
Soft annealed (O) or ½H copper strip is most common; it conforms tightly during winding without springback, with insulation paper or polyimide overlay applied during build.
Can you slit copper strip to narrow widths?
Yes. Precision slitting from mill master coils down to ~10 mm wide with tight burr and camber tolerances for stamping and electronics use.
Which copper grade is best for connectors?
Cu-ETP for general electrical contacts; high-performance copper alloys (CuSn, CuNiSi) for spring-temper terminals where elastic strength matters.
Get a copper strip quotation.
Tell us thickness, width, temper, coil weight and volume. We revert with mill options and indicative pricing within one working day.