Brass billets for extrusion, forging & machining.
Continuous-cast brass billets sized to your press or forging line. CW614N, CW617N, DZR and lead-free grades are available, with full EN 10204 3.1 chemistry traceability.
Three billet programmes.
Extrusion Billets
Round brass billets cut and chamfered for rod, profile and tube extrusion presses.
Forging Billets
Pre-cut brass forging stock for valve, fitting and plumbing forging plants.
Machining Billets
Large-diameter brass billets for one-off machined components and tooling.
Standard sizes & grades.
- Standard diameters: Ø 100 mm – Ø 350 mm
- Standard length: 350 mm – 1,000 mm (cut to customer order)
- Grades: CW614N · CW617N · CW602N (DZR) · CW724R · CW725R (lead-free)
- Surface: As-cast, peeled or turned on request
- Chemistry to EN 1652 / EN 12420
Where billets ship.
Production & consistency.
Billet production
Cast on continuous casting lines, homogenised, peeled where required and length-cut to customer drawing.
Material consistency
Continuous casting delivers uniform grain structure across the full billet length, critical for predictable extrusion and forging.
Chemical composition
Full chemistry control to EN 1652 / EN 12420 with EN 10204 3.1 mill test certificate per heat.
Inclusion control
Low slag and inclusion levels from clean-melt practice, improving yield and downstream machining performance.
Brass billets supply across the GCC, Levant & Iraq.
TIC Dubai supplies brass billets to fabricators, OEMs, valve and fitting manufacturers, joineries and trade distributors across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain in the UAE; Riyadh, Dammam, Al Khobar and Jeddah in Saudi Arabia; Doha in Qatar; Muscat, Sohar and Salalah in Oman; Kuwait City, Shuwaikh and Shuaiba in Kuwait; Manama in Bahrain; Amman and Aqaba in Jordan; and Erbil, Baghdad, Basra and Umm Qasr in Iraq.
Brass billets FAQ
What diameters of brass billet do you supply?
Standard brass billets are supplied from Ø 100 mm to Ø 350 mm in lengths from 350 mm to 1,000 mm. Custom diameters and lengths are available on dedicated casting runs.
Which grades are supplied as billet?
CW617N is the standard hot-forging and extrusion billet grade. CW614N (machining), CW602N (DZR) and lead-free CW724R / CW725R / CW727R are supplied for specialist programmes.
Are mill test certificates included?
Yes, every billet shipment is supplied with EN 10204 3.1 mill test certificates covering chemistry per heat and dimensional compliance to EN 1652 / EN 12420.
Get a brass billet quotation.
Tell us diameter, length, grade, annual tonnage and destination. We revert with mill options and indicative pricing.